jaykoe El Producto:
PRODUCTION HARDWARE & soundcards
SOUNDCARDS

soundcard for the G4?

i own an echo layla and it is awsome. you can get a used one for pretty cheap. but be warned, the old event models are now unsopported. echo has put out a 24 bit version of all their cards.the layla has 8 in, 10 out, midi, word clock and spdif digital. a real all inclusive sound card. also checkout the m-audio 1010 for a comparable card.

---------- ----- -- -- - -

it all depends on your needs...if you just need a 2 channel card with >digital i/o, then there are a few choices at around $2-300 or so (used >Audiomedia III, one of the lower end cards from Event, Emagic makes one..). >any one of these would probably be fine, assuming they all have ASIO >drivers >that work (Digidesign's AM III would be my choice, but if you buy it new >for >a little bit more you might as well get the 001). make sure you investigate >and confirm the card will work with the apps you want to run > >in the upper end of things, if you need more inputs and outputs, the Digi >001 is about $800 bundled with protools LE. it's a nice interface, and you >get two mic pre's as well as up to 18 inputs if you use them all (8 analog, >8 ch. ADAT and 2 ch. S/PDIF digital). there's ASIO support if you use >cubase >or any other app that uses ASIO (Peak, for example) > >if you really need a lot of ins & outs, the MOTU 2408 would be the way to >go...you can do 8 analog in out plus up to 24 channels of ADAT or DA-88 >(very handy of you're using an 02R with ADAT/DA-88 cards) and it's >expandable to sync with outher similar MOTU audio interfaces. that's about >$1000, but last time i installed a 2408 it wasn't all that compatible with >protools so that's an issue to consider. if you're going to be using >protools a lot or plan or need more than 2 audio ins & outs, the Digi 001 >is >probably the best bang for hte buck. it has built in MIDI as well so that >eliminates the need for a simple MIDI interface. > >if you really need a pile of digital I/O and you are using a console like >an >02R with the ADAT cards or use ADAT's or DA-88's a lot, consider the 2408. >it also works with ASIO and it has word clock in/out for digital sync. when >it's all set up it's a beautiful thing to have all your cubase ins & outs >routed in & out of your 02R. beats mixing with a mouse any day